#include <Scheduler.h>

Public Member Functions
	Scheduler ()
	Constructs a scheduler in the state set by resetScheduler(). More...

virtual	~Scheduler ()

void	initiationForSimulation (ConsoleMode iMode=ConsoleMode::Console)
	Prepares the RELAP5 bridge and the working directory for a run. Call it after parseOptions(). More...

void	endSimulation ()
	Does nothing. More...

void	readInfoFromFile (ConsoleMode iMode=ConsoleMode::Console)
	Line-based alternative to parseOptions(); the engine's entry points do not call it. More...

void	setProjectDirectory (std::string)

void	setOutputDirectory (std::string)

void	setESDirectory (std::string)

void	setPEDirectory (std::string)

void	setKPSDirectory (std::string)

void	setInputDeckFileDirectoryAndName (std::string)

int	getSolverPort () const

void	setEOPDirectory (std::string)

void	setODMDirectory (std::string)

void	setOATDirectory (std::string)

void	setOCTDirectory (std::string)

void	setHardwareReliabilityDirectory (std::string)

void	setIndicatorsDirectory (std::string)

void	setSchedulerDirectory (std::string)

void	setSystemDirectory (std::string)

void	setSupportSystemsDirectory (std::string)

bool	checkForTerminatingCurrentSequence ()
	Decides whether the running sequence ends at this evaluation point. More...

void	setSequenceTruncationProbability (double)

void	setSequenceTruncationTime (double)

double	getSequenceTruncationProbability ()

double	getSequenceTruncationTime ()

void	setODMActionTimeMultiplier (double)

double	getODMActionTimeMultiplier ()

void	setOATActionTimeMultiplier (double)

double	getOATActionTimeMultiplier ()

void	setOCTActionTimeMultiplier (double)

double	getOCTActionTimeMultiplier ()

void	setSequenceTerminatedByAlarm (bool)

bool	getSequenceTerminatedByAlarm ()

void	setSequenceTerminatedByNonResponseAction (bool)

bool	getSequenceTerminatedByNonResponseAction ()

void	setInfoOfSequenceTerminatedByAlarm (std::string)

std::string	getInfoOfSequenceTerminatedByAlarm ()

void	setInfoSequenceTerminatedByNonResponseAction (std::string)

std::string	getInfoSequenceTerminatedByNonResponseAction ()

void	copyScheduler (Scheduler &)
	Copies directories, truncation settings, multipliers, termination flags, file names and mode from another scheduler. The solver port and viz port are not copied. More...

void	saveSchedulerToFile (std::ofstream &)
	Writes the scheduler to a text restart stream, starting with the label `Scheduler`. Strings are written unquoted and read back with `>>`, so paths and termination texts that contain whitespace do not round-trip. More...

void	retrieveSchedulerFromFile (std::ifstream &)
	Reads the layout written by saveSchedulerToFile. A stream that does not start with the `Scheduler` label sets r5pars_.sim_err. More...

void	setFileNameNodeMultiProcessor (std::string)

void	setFileNameIndeck (std::string)

void	setFileNameRestart (std::string)

void	setFileNameES (std::string)

std::string	getFileNameNodeMultiProcessor ()

std::string	getFileNameIndeck ()

std::string	getFileNameRestart ()

std::string	getFileNameES ()

void	setMiMode (ConsoleMode)

ConsoleMode	getMiMode ()

void	resetScheduler ()
	Resets every member to its default: multipliers 1.0, termination flags off, all directories, file names and termination texts "NONE", truncation probability and time 0.0, mode ConsoleMode::Console. The solver port and viz port are not reset. More...

void	parseOptions (int argc, char *argv[])
	Parses the command line and `ZiniADS.txt`, fills this scheduler and g_sim.config, and reads `ZCtrlPar.txt`. More...

int	getVizPort () const

Directories
parseOptions() makes the project directory absolute and derives the others from it by plain concatenation; every derived directory ends with a '/': output `/Output/`, ES `/Output/ES/`, PE `/Output/PE/`, KPS `/Output/KPS/`, EOP `/Input/Crew/Procedures/`, ODM `/Input/Crew/DecisionMaker/`, OAT `/Input/Crew/ActionTaker/`, OCT `/Input/Crew/Consultant/`, hardware reliability `/Input/HardwareReliability/`, indicators `/Input/Indicators/`, scheduler `/Input/Scheduler/`, system `/Input/System/`, support systems `/Input/SupportSystemsReliability/`. The scheduler does not create any of them. Under MPI each client rank redirects the output, ES, PE and KPS directories to its own rank directory with the setters. Until parseOptions() or readInfoFromFile() runs every directory is the string "NONE".
std::string	getProjectDirectory ()

std::string	getOutputDirectory ()

std::string	getESDirectory ()

std::string	getPEDirectory ()

std::string	getKPSDirectory ()

std::string	getInputDeckFileDirectoryAndName ()

std::string	getEOPDirectory ()

std::string	getODMDirectory ()

std::string	getOATDirectory ()

std::string	getOCTDirectory ()

std::string	getHardwareReliabilityDirectory ()

std::string	getIndicatorsDirectory ()

std::string	getSchedulerDirectory ()

std::string	getSystemDirectory ()

std::string	getSupportSystemsDirectory ()

Private Member Functions
template<class Archive >
void	serialize (Archive &ar, const unsigned int version)

Private Attributes
ConsoleMode	m_iMode

std::string	project_directory

std::string	output_directory

std::string	es_directory

std::string	pe_directory

std::string	kps_directory

std::string	input_deck_file_directory_and_name

std::string	eop_directory

std::string	ODM_directory

std::string	OAT_directory

std::string	OCT_directory

std::string	support_systems_directory

std::string	hardware_reliability_directory

std::string	indicators_directory

std::string	scheduler_directory

std::string	system_directory

double	sequence_truncation_probabiliy

double	sequence_truncation_time

double	OAT_action_time_multiplier

double	ODM_action_time_multiplier

double	OCT_action_time_multiplier

bool	sequence_terminated_by_alarm

bool	sequence_terminated_by_non_response_action

std::string	info_of_sequence_terminated_by_alarm

std::string	info_sequence_terminated_by_non_response_action

std::string	file_name_NodeMultiProcessor

std::string	file_name_indeck

std::string	file_name_restart

std::string	file_name_ES

int	solver_port_ = 9090

int	viz_port_ = 0

Friends
class	boost::serialization::access

Detailed Description

Definition at line 39 of file Scheduler.h.

Constructor & Destructor Documentation

◆ Scheduler()

Scheduler::Scheduler ( )

Constructs a scheduler in the state set by resetScheduler().

Definition at line 52 of file Scheduler.cpp.

References resetScheduler().

Here is the call graph for this function:

◆ ~Scheduler()

Scheduler::~Scheduler ( )

virtual

Definition at line 56 of file Scheduler.cpp.

Member Function Documentation

◆ checkForTerminatingCurrentSequence()

bool Scheduler::checkForTerminatingCurrentSequence ( )

Decides whether the running sequence ends at this evaluation point.

Returns: true when the sequence must stop.

The checks run in this order and the first that applies wins:

r5pars_.csnostop is already nonzero (an end state exists): stop, nothing added.
The recent unconditional branch probability is below the truncation probability: end state Consequence::ProbTruncated, csnostop 4.
The simulation time is above the truncation time: Consequence::TimeTruncated, csnostop 4.
An alarm requested termination (setSequenceTerminatedByAlarm): end state Consequence::EndseqAlarm with the stored text, csnostop 5; the flag is cleared.
A non-response action requested termination: Consequence::NonResponseAction with the stored text, csnostop 5; the flag is cleared.
r5pars_.sim_err is set: end state with the consequence and message held by BranchRecord (getTempTypeOfConsequence, getTempESMessage), csnostop 6.

Each new end state is added through BranchRecord::addAnEndState(). Every stopping case sets g_sim.expected_abort. Cases 2 to 5 also display the text and add it to the analysis record.

Definition at line 694 of file Scheduler.cpp.

References BranchRecord::addAnEndState(), AnalysisInfoContainer::addRecord(), SimulationContext::Aux_info, SimulationContext::Branch_center, SimulationContext::Command_handler, CommandControlCenter::displayInformation(), EndseqAlarm, SimulationContext::expected_abort, g_sim, BranchRecord::getIDOfMotherBranch(), BranchRecord::getRecentUnconditionalBranchProbability(), BranchRecord::getTempESMessage(), BranchRecord::getTempTypeOfConsequence(), info_of_sequence_terminated_by_alarm, info_sequence_terminated_by_non_response_action, NonResponseAction, ProbTruncated, r5pars_, sequence_terminated_by_alarm, sequence_terminated_by_non_response_action, sequence_truncation_probabiliy, sequence_truncation_time, BranchEndState::setConsequenceDescription(), BranchEndState::setTypeOfConsequence(), and TimeTruncated.

Referenced by AdsidacCallback::onEvaluationPoint().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ copyScheduler()

void Scheduler::copyScheduler ( Scheduler & _ss )

Copies directories, truncation settings, multipliers, termination flags, file names and mode from another scheduler. The solver port and viz port are not copied.

Definition at line 911 of file Scheduler.cpp.

References eop_directory, es_directory, file_name_ES, file_name_indeck, file_name_NodeMultiProcessor, file_name_restart, getEOPDirectory(), getESDirectory(), getFileNameES(), getFileNameIndeck(), getFileNameNodeMultiProcessor(), getFileNameRestart(), getHardwareReliabilityDirectory(), getIndicatorsDirectory(), getInfoOfSequenceTerminatedByAlarm(), getInfoSequenceTerminatedByNonResponseAction(), getInputDeckFileDirectoryAndName(), getKPSDirectory(), getMiMode(), getOATActionTimeMultiplier(), getOATDirectory(), getOCTActionTimeMultiplier(), getOCTDirectory(), getODMActionTimeMultiplier(), getODMDirectory(), getOutputDirectory(), getPEDirectory(), getProjectDirectory(), getSchedulerDirectory(), getSequenceTerminatedByAlarm(), getSequenceTerminatedByNonResponseAction(), getSequenceTruncationProbability(), getSequenceTruncationTime(), getSupportSystemsDirectory(), getSystemDirectory(), hardware_reliability_directory, indicators_directory, info_of_sequence_terminated_by_alarm, info_sequence_terminated_by_non_response_action, input_deck_file_directory_and_name, kps_directory, m_iMode, OAT_action_time_multiplier, OAT_directory, OCT_action_time_multiplier, OCT_directory, ODM_action_time_multiplier, ODM_directory, output_directory, pe_directory, project_directory, scheduler_directory, sequence_terminated_by_alarm, sequence_terminated_by_non_response_action, sequence_truncation_probabiliy, sequence_truncation_time, support_systems_directory, and system_directory.

Here is the call graph for this function:

◆ endSimulation()

void Scheduler::endSimulation ( )

Does nothing.

Definition at line 469 of file Scheduler.cpp.

◆ getEOPDirectory()

string Scheduler::getEOPDirectory ( )

Definition at line 616 of file Scheduler.cpp.

References eop_directory.

Referenced by copyScheduler(), BranchMentalProcedureActivationTime::readInfoFromFile(), BranchProcedureAtionTime::readInfoFromFile(), BranchProcedureControlValue::readInfoFromFile(), Procedures::readInfoFromFile(), and ProcedureStep::readInfoFromFile().

Here is the caller graph for this function:

◆ getESDirectory()

string Scheduler::getESDirectory ( )

Definition at line 601 of file Scheduler.cpp.

References es_directory.

Referenced by BranchRecord::appendEndStateSummary(), copyScheduler(), BranchRecord::endSimulation(), initiationForSimulation(), Server::merge_outputs(), save_sequence_outputs(), BranchEndState::saveInfoToFile(), and AnalysisInfoContainer::saveInfoToFile().

Here is the caller graph for this function:

◆ getFileNameES()

string Scheduler::getFileNameES ( )

Definition at line 966 of file Scheduler.cpp.

References file_name_ES.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getFileNameIndeck()

string Scheduler::getFileNameIndeck ( )

Definition at line 960 of file Scheduler.cpp.

References file_name_indeck.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getFileNameNodeMultiProcessor()

string Scheduler::getFileNameNodeMultiProcessor ( )

Definition at line 957 of file Scheduler.cpp.

References file_name_NodeMultiProcessor.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getFileNameRestart()

string Scheduler::getFileNameRestart ( )

Definition at line 963 of file Scheduler.cpp.

References file_name_restart.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getHardwareReliabilityDirectory()

string Scheduler::getHardwareReliabilityDirectory ( )

Definition at line 628 of file Scheduler.cpp.

References hardware_reliability_directory.

Referenced by copyScheduler(), and HWReliabilityModule::readInfoFromFile().

Here is the caller graph for this function:

◆ getIndicatorsDirectory()

string Scheduler::getIndicatorsDirectory ( )

Definition at line 631 of file Scheduler.cpp.

References indicators_directory.

Referenced by copyScheduler(), and ControlPanel::readInfoFromFile().

Here is the caller graph for this function:

◆ getInfoOfSequenceTerminatedByAlarm()

string Scheduler::getInfoOfSequenceTerminatedByAlarm ( )

Definition at line 824 of file Scheduler.cpp.

References info_of_sequence_terminated_by_alarm.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getInfoSequenceTerminatedByNonResponseAction()

string Scheduler::getInfoSequenceTerminatedByNonResponseAction ( )

Definition at line 830 of file Scheduler.cpp.

References info_sequence_terminated_by_non_response_action.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getInputDeckFileDirectoryAndName()

string Scheduler::getInputDeckFileDirectoryAndName ( )

Definition at line 610 of file Scheduler.cpp.

References input_deck_file_directory_and_name.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getKPSDirectory()

string Scheduler::getKPSDirectory ( )

Definition at line 607 of file Scheduler.cpp.

References kps_directory.

Referenced by copyScheduler(), Server::merge_outputs(), KeyParameterHistory::outputHistoryToFile(), and save_sequence_outputs().

Here is the caller graph for this function:

◆ getMiMode()

ConsoleMode Scheduler::getMiMode ( )

Definition at line 1003 of file Scheduler.cpp.

References m_iMode.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getOATActionTimeMultiplier()

double Scheduler::getOATActionTimeMultiplier ( )

Definition at line 798 of file Scheduler.cpp.

References OAT_action_time_multiplier.

Referenced by copyScheduler(), and BranchProbability::sendBranchInfoToCommandCenter().

Here is the caller graph for this function:

◆ getOATDirectory()

string Scheduler::getOATDirectory ( )

Definition at line 622 of file Scheduler.cpp.

References OAT_directory.

Referenced by copyScheduler(), Operator::initiationForSimulation(), KBConcept::ReadAntonymBaseFromInputFile(), EventSchemaBase::ReadEventSchemaBaseFromInputFile(), KB::readHardWiredDiagnosis(), KB::readIndicatorBiasFactors(), ManeuverAction::readInfoFromFile(), InstantiationBase::ReadInstantiationBaseFromInputFile(), KBConcept::ReadKBConceptInfoFromInputFile(), ReasonMachine::ReadKEBaseAndKNFromInputFile(), ReasonMachine::ReadKnowledgeBaseFromInputFile(), MentalRepresentation::ReadMentalRepresentationtInfoFromInputFile(), ReasonMachine::ReadOperatorReasonMachineProfile(), ProximityModel::ReadProximityModelFromInputFile(), RoutineMonitor::ReadRoutineMonitorInforFromInputFile(), ReasonMachine::ReadSemanticSentencesFromInputFile(), and KB::readSystemDecompositionKB().

Here is the caller graph for this function:

◆ getOCTActionTimeMultiplier()

double Scheduler::getOCTActionTimeMultiplier ( )

Definition at line 804 of file Scheduler.cpp.

References OCT_action_time_multiplier.

Referenced by copyScheduler(), and BranchProbability::sendBranchInfoToCommandCenter().

Here is the caller graph for this function:

◆ getOCTDirectory()

string Scheduler::getOCTDirectory ( )

Definition at line 625 of file Scheduler.cpp.

References OCT_directory.

Referenced by copyScheduler(), Operator::initiationForSimulation(), KB::readHardWiredDiagnosis(), KB::readIndicatorBiasFactors(), ManeuverAction::readInfoFromFile(), and KB::readSystemDecompositionKB().

Here is the caller graph for this function:

◆ getODMActionTimeMultiplier()

double Scheduler::getODMActionTimeMultiplier ( )

Definition at line 792 of file Scheduler.cpp.

References ODM_action_time_multiplier.

Referenced by copyScheduler(), and BranchProbability::sendBranchInfoToCommandCenter().

Here is the caller graph for this function:

◆ getODMDirectory()

string Scheduler::getODMDirectory ( )

Definition at line 619 of file Scheduler.cpp.

References ODM_directory.

Referenced by copyScheduler(), Operator::initiationForSimulation(), KBConcept::ReadAntonymBaseFromInputFile(), EventSchemaBase::ReadEventSchemaBaseFromInputFile(), KB::readHardWiredDiagnosis(), KB::readIndicatorBiasFactors(), ManeuverAction::readInfoFromFile(), InstantiationBase::ReadInstantiationBaseFromInputFile(), KBConcept::ReadKBConceptInfoFromInputFile(), ReasonMachine::ReadKEBaseAndKNFromInputFile(), ReasonMachine::ReadKnowledgeBaseFromInputFile(), MentalRepresentation::ReadMentalRepresentationtInfoFromInputFile(), ReasonMachine::ReadOperatorReasonMachineProfile(), ProximityModel::ReadProximityModelFromInputFile(), RoutineMonitor::ReadRoutineMonitorInforFromInputFile(), ReasonMachine::ReadSemanticSentencesFromInputFile(), and KB::readSystemDecompositionKB().

Here is the caller graph for this function:

◆ getOutputDirectory()

string Scheduler::getOutputDirectory ( )

Definition at line 598 of file Scheduler.cpp.

References output_directory.

Referenced by copyScheduler(), Server::merge_outputs(), ReasonMachine::PrintKnowledgeWeb(), ReasonMachine::PrintSemanticBase(), and ReasonMachine::SaveSequenceInfoToFile().

Here is the caller graph for this function:

◆ getPEDirectory()

string Scheduler::getPEDirectory ( )

Definition at line 604 of file Scheduler.cpp.

References pe_directory.

Referenced by copyScheduler(), Server::dispatch_resume_tasks(), main(), Server::merge_outputs(), and BranchCluster::savePENodeToFile().

Here is the caller graph for this function:

◆ getProjectDirectory()

string Scheduler::getProjectDirectory ( )

Definition at line 595 of file Scheduler.cpp.

References project_directory.

Referenced by copyScheduler(), initiationForSimulation(), main(), AdsidacCallback::onBranchingPoint(), CalculationAid::readInfoFromFile(), restart_base_path(), RelapSolver::restore(), run_merge_only(), Client::self_merge_outputs(), and Server::Simulation().

Here is the caller graph for this function:

◆ getSchedulerDirectory()

string Scheduler::getSchedulerDirectory ( )

Definition at line 634 of file Scheduler.cpp.

References scheduler_directory.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getSequenceTerminatedByAlarm()

bool Scheduler::getSequenceTerminatedByAlarm ( )

Definition at line 811 of file Scheduler.cpp.

References sequence_terminated_by_alarm.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getSequenceTerminatedByNonResponseAction()

bool Scheduler::getSequenceTerminatedByNonResponseAction ( )

Definition at line 817 of file Scheduler.cpp.

References sequence_terminated_by_non_response_action.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getSequenceTruncationProbability()

double Scheduler::getSequenceTruncationProbability ( )

Definition at line 643 of file Scheduler.cpp.

References sequence_truncation_probabiliy.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getSequenceTruncationTime()

double Scheduler::getSequenceTruncationTime ( )

Definition at line 646 of file Scheduler.cpp.

References sequence_truncation_time.

Referenced by copyScheduler(), and main().

Here is the caller graph for this function:

◆ getSolverPort()

int Scheduler::getSolverPort ( ) const

Returns: Mock solver port (--solver-port, default 9090).

Definition at line 613 of file Scheduler.cpp.

References solver_port_.

◆ getSupportSystemsDirectory()

string Scheduler::getSupportSystemsDirectory ( )

Definition at line 640 of file Scheduler.cpp.

References support_systems_directory.

Referenced by copyScheduler().

Here is the caller graph for this function:

◆ getSystemDirectory()

string Scheduler::getSystemDirectory ( )

Definition at line 637 of file Scheduler.cpp.

References system_directory.

Referenced by copyScheduler(), InitiatingEventController::readInfoFromFile(), and SystemModule::readInfoFromFile().

Here is the caller graph for this function:

◆ getVizPort()

int Scheduler::getVizPort ( ) const

inline

Returns: Port of the DET visualization server (--viz-port), 0 when disabled.

Definition at line 227 of file Scheduler.h.

References viz_port_.

◆ initiationForSimulation()

void Scheduler::initiationForSimulation ( ConsoleMode iMode = ConsoleMode::Console )

Prepares the RELAP5 bridge and the working directory for a run. Call it after parseOptions().

Parameters

iMode Simulation mode; stored and copied to r5pars_.tsimmode.

Resets the r5pars_ control flags (first-scenario flag on, no branch generation, no stop, time -2.0, British units) and the argument strings "-i", "-o", "-r". In console mode it also sets the RELAP5 arguments: program name "relap5", output file "out.o", the input deck path, and the restart file ("restart.r", or <shm_prefix>restart.r with in-memory restart). The process exits with a FATAL message when the restart path or the input deck path is longer than 80 characters (the RELAP5 filename limit) or when the input deck cannot be opened.

It then deletes stale files: Scenario info.txt, Procedure data.txt and Scan data.txt in the ES directory, and out.o, restart.r, dbg info.txt, Scenario info.txt, Procedure data.txt in the current working directory (err messages.txt too in console and net server mode). Finally it computes the configuration fingerprint over the project inputs and the input deck, stores it in g_sim.config_fingerprint and prints it as [CONFIG] fingerprint=0x....

Definition at line 364 of file Scheduler.cpp.

References adsidac::compute_config_fingerprint(), SimulationContext::config, SimulationContext::config_fingerprint, Console, es_directory, g_sim, getESDirectory(), getProjectDirectory(), input_deck_file_directory_and_name, m_iMode, SimConfig::memory_restart, NetServer, r5pars_, and SimConfig::shm_prefix.

Referenced by Client::Client(), main(), and Server::Server().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ parseOptions()

void Scheduler::parseOptions	(	int	argc,
		char *	argv[]
	)

Parses the command line and ZiniADS.txt, fills this scheduler and g_sim.config, and reads ZCtrlPar.txt.

Parameters

argc	Argument count as passed to main().
argv	Argument vector as passed to main().

Sources and precedence: the command line is stored first, then ZiniADS.txt from the current working directory (if it exists) is parsed as a Boost config file (key=value, keys are the long option names). A value given on the command line wins over the file. --project-dir and --input-deck are required from one of the two sources. --help, --version and --info print and call exit(0) before the required options are checked. An unknown option or a missing required option prints an error and calls exit(1).

Effects:

Project directory and input deck path are made absolute against the current working directory; the sub-directories listed under "Directories" are derived.
Solver: --solver=relap|0 leaves g_sim.config.solver_url empty (RELAP5) and rejects --solver-url; --solver=mock|1 sets the URL to --solver-url or to http://localhost:<--solver-port>. Because --solver defaults to relap, --solver-url alone is an error.
Restart: --no-memory-restart turns in-memory restart off; it cannot be combined with an explicit --memory-limit above 0. With in-memory restart the shared memory prefix is /dev/shm/adsidac_<pid>_ when /dev/shm exists, otherwise <temp dir>/adsidac_<pid>_.
--no-thermo-cache, --compress-queue, --aggregate-pe, --enable-rm-cycle, --occupancy-log, --truncation-time are copied to g_sim.config.
--viz-outputs (events, es, all; comma separated) requires --viz-port.
--notify-ntfy without a value uses a topic generated from the host name.
Checkpoint: --checkpoint-dir and --resume are made absolute against the launch directory; --checkpoint-interval requires --checkpoint-dir; --checkpoint-stop requires --checkpoint-interval; the checkpoint directory is created.
Merge: --merge is now (0), serial (1) or defer (2); --merge-only cannot be combined with --resume or checkpointing; --resume is refused while <project>/Output/MERGE_PENDING.txt exists.
In console and net server mode, <project>/Input/Scheduler/ZCtrlPar.txt supplies the truncation probability and truncation time (third and fifth token). A missing file sets r5pars_.terminateall and returns; a file that cannot be parsed is fatal (exit(1)). A --truncation-time above 0 then replaces the time from the file.

Every validation failure prints an ERROR line and calls exit(1). The function does not create or clean the output directories.

Definition at line 59 of file Scheduler.cpp.

References SimConfig::aggregate_pe_output, auto_ntfy_topic(), SimConfig::checkpoint_dir, SimConfig::checkpoint_interval, SimConfig::checkpoint_stop, SimConfig::compress_queue, SimulationContext::config, Console, e, eop_directory, es_directory, g_sim, hardware_reliability_directory, indicators_directory, input_deck_file_directory_and_name, kps_directory, m_iMode, SimConfig::memory_limit_mb, SimConfig::memory_restart, SimConfig::merge_mode, SimConfig::merge_only, SimConfig::merge_threads, NetServer, notify_discord_webhook, notify_ntfy_topic, OAT_directory, SimConfig::occupancy_log, OCT_directory, ODM_directory, output_directory, pe_directory, project_directory, r5pars_, SimConfig::resume_file, SimConfig::rm_cycle_enabled, scheduler_directory, sequence_truncation_probabiliy, sequence_truncation_time, SimConfig::shm_prefix, solver_port_, SimConfig::solver_url, support_systems_directory, system_directory, SimConfig::thermo_cache_mode, SimConfig::truncation_time_override, SimConfig::viz_output_end_states, SimConfig::viz_output_events, and viz_port_.

Referenced by main(), and run_merge_only().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ readInfoFromFile()

void Scheduler::readInfoFromFile ( ConsoleMode iMode = ConsoleMode::Console )

Line-based alternative to parseOptions(); the engine's entry points do not call it.

In console and net server mode it reads ZiniADS.txt from the current working directory as four lines (a label line, the project directory, a label line, the input deck path), derives the same sub-directories as parseOptions() and reads ZCtrlPar.txt. It reads no command-line option and sets nothing in g_sim.config. A missing file sets r5pars_.terminateall.

< read in "project-dir"

< read in "input-deck"

Definition at line 471 of file Scheduler.cpp.

References Console, eop_directory, es_directory, hardware_reliability_directory, indicators_directory, input_deck_file_directory_and_name, kps_directory, m_iMode, NetServer, OAT_directory, OCT_directory, ODM_directory, output_directory, pe_directory, project_directory, r5pars_, scheduler_directory, sequence_truncation_probabiliy, sequence_truncation_time, support_systems_directory, and system_directory.

◆ resetScheduler()

void Scheduler::resetScheduler ( )

Resets every member to its default: multipliers 1.0, termination flags off, all directories, file names and termination texts "NONE", truncation probability and time 0.0, mode ConsoleMode::Console. The solver port and viz port are not reset.

Definition at line 969 of file Scheduler.cpp.

References Console, eop_directory, es_directory, file_name_ES, file_name_indeck, file_name_NodeMultiProcessor, file_name_restart, hardware_reliability_directory, indicators_directory, info_of_sequence_terminated_by_alarm, info_sequence_terminated_by_non_response_action, input_deck_file_directory_and_name, kps_directory, m_iMode, OAT_action_time_multiplier, OAT_directory, OCT_action_time_multiplier, OCT_directory, ODM_action_time_multiplier, ODM_directory, output_directory, pe_directory, project_directory, scheduler_directory, sequence_terminated_by_alarm, sequence_terminated_by_non_response_action, sequence_truncation_probabiliy, sequence_truncation_time, support_systems_directory, and system_directory.

Referenced by Scheduler().

Here is the caller graph for this function:

◆ retrieveSchedulerFromFile()

void Scheduler::retrieveSchedulerFromFile ( std::ifstream & )

Reads the layout written by saveSchedulerToFile. A stream that does not start with the Scheduler label sets r5pars_.sim_err.

Definition at line 860 of file Scheduler.cpp.

References SimulationContext::Branch_center, eop_directory, es_directory, file_name_ES, file_name_indeck, file_name_NodeMultiProcessor, file_name_restart, g_sim, hardware_reliability_directory, indicators_directory, info_of_sequence_terminated_by_alarm, info_sequence_terminated_by_non_response_action, input_deck_file_directory_and_name, kps_directory, m_iMode, NoKB, OAT_action_time_multiplier, OAT_directory, OCT_action_time_multiplier, OCT_directory, ODM_action_time_multiplier, ODM_directory, output_directory, pe_directory, project_directory, r5pars_, scheduler_directory, sequence_terminated_by_alarm, sequence_terminated_by_non_response_action, sequence_truncation_probabiliy, sequence_truncation_time, BranchRecord::setTempESMessage(), BranchRecord::setTempTypeOfConsequence(), support_systems_directory, and system_directory.

Here is the call graph for this function:

◆ saveSchedulerToFile()

void Scheduler::saveSchedulerToFile ( std::ofstream & )

Writes the scheduler to a text restart stream, starting with the label Scheduler. Strings are written unquoted and read back with >>, so paths and termination texts that contain whitespace do not round-trip.

Definition at line 834 of file Scheduler.cpp.

References eop_directory, es_directory, file_name_indeck, file_name_NodeMultiProcessor, hardware_reliability_directory, indicators_directory, info_of_sequence_terminated_by_alarm, info_sequence_terminated_by_non_response_action, input_deck_file_directory_and_name, kps_directory, m_iMode, OAT_action_time_multiplier, OAT_directory, OCT_action_time_multiplier, OCT_directory, ODM_action_time_multiplier, ODM_directory, output_directory, pe_directory, project_directory, scheduler_directory, sequence_terminated_by_alarm, sequence_terminated_by_non_response_action, sequence_truncation_probabiliy, sequence_truncation_time, support_systems_directory, and system_directory.

◆ serialize()

template<class Archive >

void Scheduler::serialize	(	Archive &	ar,
		const unsigned int	version
	)

inlineprivate

◆ setEOPDirectory()

void Scheduler::setEOPDirectory ( std::string )

Definition at line 667 of file Scheduler.cpp.

References eop_directory.

◆ setESDirectory()

void Scheduler::setESDirectory ( std::string )

Definition at line 655 of file Scheduler.cpp.

References es_directory.

Referenced by Client::Client().

Here is the caller graph for this function:

◆ setFileNameES()

void Scheduler::setFileNameES ( std::string )

Definition at line 954 of file Scheduler.cpp.

References file_name_ES.

Referenced by BranchEndState::saveInfoToFile().

Here is the caller graph for this function:

◆ setFileNameIndeck()

void Scheduler::setFileNameIndeck ( std::string )

Definition at line 948 of file Scheduler.cpp.

References file_name_indeck.

◆ setFileNameNodeMultiProcessor()

void Scheduler::setFileNameNodeMultiProcessor ( std::string )

Definition at line 945 of file Scheduler.cpp.

References file_name_NodeMultiProcessor.

◆ setFileNameRestart()

void Scheduler::setFileNameRestart ( std::string )

Definition at line 951 of file Scheduler.cpp.

References file_name_restart.

◆ setHardwareReliabilityDirectory()

void Scheduler::setHardwareReliabilityDirectory ( std::string )

Definition at line 679 of file Scheduler.cpp.

References hardware_reliability_directory.

◆ setIndicatorsDirectory()

void Scheduler::setIndicatorsDirectory ( std::string )

Definition at line 682 of file Scheduler.cpp.

References indicators_directory.

◆ setInfoOfSequenceTerminatedByAlarm()

void Scheduler::setInfoOfSequenceTerminatedByAlarm ( std::string )

Definition at line 821 of file Scheduler.cpp.

References info_of_sequence_terminated_by_alarm.

Referenced by ControlPanel::checkForNewAlarms().

Here is the caller graph for this function:

◆ setInfoSequenceTerminatedByNonResponseAction()

void Scheduler::setInfoSequenceTerminatedByNonResponseAction ( std::string )

Definition at line 827 of file Scheduler.cpp.

References info_sequence_terminated_by_non_response_action.

Referenced by ProcedureStep::oneThroughProcessForProcedureStep().

Here is the caller graph for this function:

◆ setInputDeckFileDirectoryAndName()

void Scheduler::setInputDeckFileDirectoryAndName ( std::string )

Definition at line 664 of file Scheduler.cpp.

References input_deck_file_directory_and_name.

◆ setKPSDirectory()

void Scheduler::setKPSDirectory ( std::string )

Definition at line 661 of file Scheduler.cpp.

References kps_directory.

Referenced by Client::Client().

Here is the caller graph for this function:

◆ setMiMode()

void Scheduler::setMiMode ( ConsoleMode n )

Definition at line 1000 of file Scheduler.cpp.

References m_iMode.

◆ setOATActionTimeMultiplier()

void Scheduler::setOATActionTimeMultiplier ( double x )

Definition at line 795 of file Scheduler.cpp.

References OAT_action_time_multiplier.

Referenced by Operator::initiationForSimulation().

Here is the caller graph for this function:

◆ setOATDirectory()

void Scheduler::setOATDirectory ( std::string )

Definition at line 673 of file Scheduler.cpp.

References OAT_directory.

◆ setOCTActionTimeMultiplier()

void Scheduler::setOCTActionTimeMultiplier ( double x )

Definition at line 801 of file Scheduler.cpp.

References OCT_action_time_multiplier.

Referenced by Operator::initiationForSimulation().

Here is the caller graph for this function:

◆ setOCTDirectory()

void Scheduler::setOCTDirectory ( std::string )

Definition at line 676 of file Scheduler.cpp.

References OCT_directory.

◆ setODMActionTimeMultiplier()

void Scheduler::setODMActionTimeMultiplier ( double x )

Definition at line 789 of file Scheduler.cpp.

References ODM_action_time_multiplier.

Referenced by Operator::initiationForSimulation().

Here is the caller graph for this function:

◆ setODMDirectory()

void Scheduler::setODMDirectory ( std::string )

Definition at line 670 of file Scheduler.cpp.

References ODM_directory.

◆ setOutputDirectory()

void Scheduler::setOutputDirectory ( std::string )

Definition at line 652 of file Scheduler.cpp.

References output_directory.

Referenced by Client::Client().

Here is the caller graph for this function:

◆ setPEDirectory()

void Scheduler::setPEDirectory ( std::string )

Definition at line 658 of file Scheduler.cpp.

References pe_directory.

Referenced by Client::Client().

Here is the caller graph for this function:

◆ setProjectDirectory()

void Scheduler::setProjectDirectory ( std::string )

Definition at line 649 of file Scheduler.cpp.

References project_directory.

◆ setSchedulerDirectory()

void Scheduler::setSchedulerDirectory ( std::string )

Definition at line 685 of file Scheduler.cpp.

References scheduler_directory.

◆ setSequenceTerminatedByAlarm()

void Scheduler::setSequenceTerminatedByAlarm ( bool bg )

Definition at line 808 of file Scheduler.cpp.

References sequence_terminated_by_alarm.

Referenced by ControlPanel::checkForNewAlarms().

Here is the caller graph for this function:

◆ setSequenceTerminatedByNonResponseAction()

void Scheduler::setSequenceTerminatedByNonResponseAction ( bool bg )

Definition at line 814 of file Scheduler.cpp.

References sequence_terminated_by_non_response_action.

Referenced by ProcedureStep::oneThroughProcessForProcedureStep().

Here is the caller graph for this function:

◆ setSequenceTruncationProbability()

void Scheduler::setSequenceTruncationProbability ( double )

◆ setSequenceTruncationTime()

void Scheduler::setSequenceTruncationTime ( double )

◆ setSupportSystemsDirectory()

void Scheduler::setSupportSystemsDirectory ( std::string )

Definition at line 691 of file Scheduler.cpp.

References support_systems_directory.

◆ setSystemDirectory()

void Scheduler::setSystemDirectory ( std::string )

Definition at line 688 of file Scheduler.cpp.

References system_directory.

Friends And Related Function Documentation

◆ boost::serialization::access

friend class boost::serialization::access

friend

Definition at line 250 of file Scheduler.h.

Member Data Documentation

◆ eop_directory

std::string Scheduler::eop_directory

private

Definition at line 238 of file Scheduler.h.

Referenced by copyScheduler(), getEOPDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setEOPDirectory().

◆ es_directory

std::string Scheduler::es_directory

private

Definition at line 236 of file Scheduler.h.

Referenced by copyScheduler(), getESDirectory(), initiationForSimulation(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setESDirectory().

◆ file_name_ES

std::string Scheduler::file_name_ES

private

Definition at line 246 of file Scheduler.h.

Referenced by copyScheduler(), getFileNameES(), resetScheduler(), retrieveSchedulerFromFile(), serialize(), and setFileNameES().

◆ file_name_indeck

std::string Scheduler::file_name_indeck

private

Definition at line 246 of file Scheduler.h.

Referenced by copyScheduler(), getFileNameIndeck(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setFileNameIndeck().

◆ file_name_NodeMultiProcessor

std::string Scheduler::file_name_NodeMultiProcessor

private

Definition at line 246 of file Scheduler.h.

Referenced by copyScheduler(), getFileNameNodeMultiProcessor(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setFileNameNodeMultiProcessor().

◆ file_name_restart

std::string Scheduler::file_name_restart

private

Definition at line 246 of file Scheduler.h.

Referenced by copyScheduler(), getFileNameRestart(), resetScheduler(), retrieveSchedulerFromFile(), serialize(), and setFileNameRestart().

◆ hardware_reliability_directory

std::string Scheduler::hardware_reliability_directory

private

Definition at line 239 of file Scheduler.h.

Referenced by copyScheduler(), getHardwareReliabilityDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setHardwareReliabilityDirectory().

◆ indicators_directory

std::string Scheduler::indicators_directory

private

Definition at line 239 of file Scheduler.h.

Referenced by copyScheduler(), getIndicatorsDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setIndicatorsDirectory().

◆ info_of_sequence_terminated_by_alarm

std::string Scheduler::info_of_sequence_terminated_by_alarm

private

Definition at line 244 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getInfoOfSequenceTerminatedByAlarm(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setInfoOfSequenceTerminatedByAlarm().

◆ info_sequence_terminated_by_non_response_action

std::string Scheduler::info_sequence_terminated_by_non_response_action

private

Definition at line 245 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getInfoSequenceTerminatedByNonResponseAction(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setInfoSequenceTerminatedByNonResponseAction().

◆ input_deck_file_directory_and_name

std::string Scheduler::input_deck_file_directory_and_name

private

Definition at line 237 of file Scheduler.h.

Referenced by copyScheduler(), getInputDeckFileDirectoryAndName(), initiationForSimulation(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setInputDeckFileDirectoryAndName().

◆ kps_directory

std::string Scheduler::kps_directory

private

Definition at line 236 of file Scheduler.h.

Referenced by copyScheduler(), getKPSDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setKPSDirectory().

◆ m_iMode

ConsoleMode Scheduler::m_iMode

private

Definition at line 235 of file Scheduler.h.

Referenced by copyScheduler(), getMiMode(), initiationForSimulation(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setMiMode().

◆ OAT_action_time_multiplier

double Scheduler::OAT_action_time_multiplier

private

Definition at line 241 of file Scheduler.h.

Referenced by copyScheduler(), getOATActionTimeMultiplier(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setOATActionTimeMultiplier().

◆ OAT_directory

std::string Scheduler::OAT_directory

private

Definition at line 238 of file Scheduler.h.

Referenced by copyScheduler(), getOATDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setOATDirectory().

◆ OCT_action_time_multiplier

double Scheduler::OCT_action_time_multiplier

private

Definition at line 241 of file Scheduler.h.

Referenced by copyScheduler(), getOCTActionTimeMultiplier(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setOCTActionTimeMultiplier().

◆ OCT_directory

std::string Scheduler::OCT_directory

private

Definition at line 238 of file Scheduler.h.

Referenced by copyScheduler(), getOCTDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setOCTDirectory().

◆ ODM_action_time_multiplier

double Scheduler::ODM_action_time_multiplier

private

Definition at line 241 of file Scheduler.h.

Referenced by copyScheduler(), getODMActionTimeMultiplier(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setODMActionTimeMultiplier().

◆ ODM_directory

std::string Scheduler::ODM_directory

private

Definition at line 238 of file Scheduler.h.

Referenced by copyScheduler(), getODMDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setODMDirectory().

◆ output_directory

std::string Scheduler::output_directory

private

Definition at line 236 of file Scheduler.h.

Referenced by copyScheduler(), getOutputDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setOutputDirectory().

◆ pe_directory

std::string Scheduler::pe_directory

private

Definition at line 236 of file Scheduler.h.

Referenced by copyScheduler(), getPEDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setPEDirectory().

◆ project_directory

std::string Scheduler::project_directory

private

Definition at line 236 of file Scheduler.h.

Referenced by copyScheduler(), getProjectDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setProjectDirectory().

◆ scheduler_directory

std::string Scheduler::scheduler_directory

private

Definition at line 239 of file Scheduler.h.

Referenced by copyScheduler(), getSchedulerDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setSchedulerDirectory().

◆ sequence_terminated_by_alarm

bool Scheduler::sequence_terminated_by_alarm

private

Definition at line 242 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getSequenceTerminatedByAlarm(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setSequenceTerminatedByAlarm().

◆ sequence_terminated_by_non_response_action

bool Scheduler::sequence_terminated_by_non_response_action

private

Definition at line 243 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getSequenceTerminatedByNonResponseAction(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setSequenceTerminatedByNonResponseAction().

◆ sequence_truncation_probabiliy

double Scheduler::sequence_truncation_probabiliy

private

Definition at line 240 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getSequenceTruncationProbability(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), and serialize().

◆ sequence_truncation_time

double Scheduler::sequence_truncation_time

private

Definition at line 240 of file Scheduler.h.

Referenced by checkForTerminatingCurrentSequence(), copyScheduler(), getSequenceTruncationTime(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), and serialize().

◆ solver_port_

int Scheduler::solver_port_ = 9090

private

Definition at line 247 of file Scheduler.h.

Referenced by getSolverPort(), and parseOptions().

◆ support_systems_directory

std::string Scheduler::support_systems_directory

private

Definition at line 238 of file Scheduler.h.

Referenced by copyScheduler(), getSupportSystemsDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setSupportSystemsDirectory().

◆ system_directory

std::string Scheduler::system_directory

private

Definition at line 239 of file Scheduler.h.

Referenced by copyScheduler(), getSystemDirectory(), parseOptions(), readInfoFromFile(), resetScheduler(), retrieveSchedulerFromFile(), saveSchedulerToFile(), serialize(), and setSystemDirectory().

◆ viz_port_

int Scheduler::viz_port_ = 0

private

Definition at line 248 of file Scheduler.h.

Referenced by getVizPort(), and parseOptions().

The documentation for this class was generated from the following files:

src/ADSIDAC/Scheduler/Scheduler.h
src/ADSIDAC/Scheduler/Scheduler.cpp

Public Member Functions

Private Member Functions

Private Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

◆ Scheduler()

◆ ~Scheduler()

Member Function Documentation

◆ checkForTerminatingCurrentSequence()

◆ copyScheduler()

◆ endSimulation()

◆ getEOPDirectory()

◆ getESDirectory()

◆ getFileNameES()

◆ getFileNameIndeck()

◆ getFileNameNodeMultiProcessor()

◆ getFileNameRestart()

◆ getHardwareReliabilityDirectory()

◆ getIndicatorsDirectory()

◆ getInfoOfSequenceTerminatedByAlarm()

◆ getInfoSequenceTerminatedByNonResponseAction()

◆ getInputDeckFileDirectoryAndName()

◆ getKPSDirectory()

◆ getMiMode()

◆ getOATActionTimeMultiplier()

◆ getOATDirectory()

◆ getOCTActionTimeMultiplier()

◆ getOCTDirectory()

◆ getODMActionTimeMultiplier()

◆ getODMDirectory()

◆ getOutputDirectory()

◆ getPEDirectory()

◆ getProjectDirectory()

◆ getSchedulerDirectory()

◆ getSequenceTerminatedByAlarm()

◆ getSequenceTerminatedByNonResponseAction()

◆ getSequenceTruncationProbability()

◆ getSequenceTruncationTime()

◆ getSolverPort()

◆ getSupportSystemsDirectory()

◆ getSystemDirectory()

◆ getVizPort()

◆ initiationForSimulation()

◆ parseOptions()

◆ readInfoFromFile()

◆ resetScheduler()

◆ retrieveSchedulerFromFile()

◆ saveSchedulerToFile()

◆ serialize()

◆ setEOPDirectory()

◆ setESDirectory()

◆ setFileNameES()

◆ setFileNameIndeck()

◆ setFileNameNodeMultiProcessor()

◆ setFileNameRestart()

◆ setHardwareReliabilityDirectory()

◆ setIndicatorsDirectory()

◆ setInfoOfSequenceTerminatedByAlarm()

◆ setInfoSequenceTerminatedByNonResponseAction()

◆ setInputDeckFileDirectoryAndName()

◆ setKPSDirectory()

◆ setMiMode()

◆ setOATActionTimeMultiplier()

◆ setOATDirectory()

◆ setOCTActionTimeMultiplier()

◆ setOCTDirectory()

◆ setODMActionTimeMultiplier()

◆ setODMDirectory()

◆ setOutputDirectory()

◆ setPEDirectory()

◆ setProjectDirectory()

◆ setSchedulerDirectory()

◆ setSequenceTerminatedByAlarm()

◆ setSequenceTerminatedByNonResponseAction()

◆ setSequenceTruncationProbability()

◆ setSequenceTruncationTime()

◆ setSupportSystemsDirectory()

◆ setSystemDirectory()

Friends And Related Function Documentation